The DCS1500(1500 Liters per hour) Centrifugal Oil Purifier sales to Italy is mainly used for the purification of marine fuel or mineral lube oil. The main application fields are: marine diesel oil treatment, marine heavy fuel oil treatment, marine lubricating oil treatment treatment, oil treatment for land power stations, oil treatment for engine test, oil treatment for gas turbine, crude oil treatment, etc. DCS Centrifugal Oil Separator can remove water and solid particles (oil residue) from mineral oil.

Working principle of high precision Centrifugal Oil Purifier

In the gravity or centrifugal force field, the mixed liquid can obtain different forces for the light and heavy liquid phases and solid phases that have different densities and are immiscible with each other, thereby separating and stratifying, which is called gravity separation in the gravity field. Centrifugal force field is called centrifugal separation. The oil to be treated enters the drum through the oil inlet pipe, and the distributor leads the oil to the outer circumference of the drum. When it reaches the distribution hole of the distributor, the unseparated oil rises from the channel formed by the arc-shaped hole in the edge of the disc pack, where it is evenly distributed into the disc pack. While flowing towards the center of the drum, the oil is continuously separated from the water and oil residue. When leaving the disc pack, the purified oil rises and enters the centripetal pump chamber. The oil is then pumped from the centripetal pump chamber by the centripetal pump and then exits the bowl at the outlet. The separated water and oil residue move to the outer periphery of the separation drum. When purifying, the separated water will rise along the outer side of the disc set, pass through the upper channel of the disc top cover and the hole on the drum cover, and enter the heavy phase pump chamber, where it will be pumped by the heavy phase pump gear pump. out. The heavier impurities accumulate in the oil residue space outside the disc group, and are discharged from the oil residue port at certain intervals (according to the amount of residue). Through the above working cycle, one working cycle is completed. After many cycles of treatment, DCS Centrifugal Oil Purifier can quickly remove moisture and impurities in the oil to meet customer needs.